Filter
Top Products
16
7. SIP
SIP Configuration
1. Under “SIP Server Settings”, you enter the server address, port, domain
name, and expiration time unit, if you choose to send a registration request
with an expiration time.
2. Gateway Settings
• Dial Plan: refer to appendix A of this guide
• # use as a quick dial function: If this box is checked, the dialed digits
would be sent out when the ‘#’ key is pressed.
• Enable # to be recognized as dial number: allow the ‘#’ key to appear in
the INVITE request URI
• Enable * to be recognized as dial number: allow the ‘*’ key to appear in
the INVITE request URI
• For the line on the endpoint, enter the Line Phone Number, Caller-ID
Name, signalling port value, authentication Username and Password,
and select if AEC is to be performed on this line.
The default settings are compatible with FWD settings. If you`d like to know
more about FWD, please visit http://www.freeworlddialup.com .