Filter
Top Products
IB-KC720-WM-E-050705
1
2
etc.
etc.
CD PROGRAM PLAY
During programming, the symbol
PROG shows in the display. To program songs to
play in your preferred order, follow steps below:
1.Press the PROGRAM button.
The symbol PROG and “ ” will
flash in the display.
2.Press the SKIP/SEARCH buttons (
or
) to select track number 2 (example).
The symbol PROG and track number
“02” will flash in the display.
Track number
3.Press the PROGRAM button. Track 2 is
now programmed.
Program number 2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5.After programming is finished, press
the PLAY/PAUSE button to begin
programmed play. Music begins with
PROG
shown in the display.
NOTE:
-The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP/
OFF button twice. Then you may press
PLAY/PAUSE button to restart normal play.
Your programmed memory will be
lost:
•
When the door is opened.
•
When the batteries are exhausted or
removed, or the optional AC ADAPTOR
is disconnected.
•
When the power is off.
Program number
7
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Track Number (song number)
4
Program Number
3 5 6 7 8
2 5 8 1 2 4 1 1
PROG.
PROG
SEARCH
PROG
PROG
PLAY/PAUSE
IB-KC720-WM-E-050705.pmd 5/25/2005, 4:16 PM8