Lenoxx Electronics CDR-190 CD Player User Manual


 
Precautions
On safety
As the laser beam used in the CD
player section is harmful to the eyes,
do not attempt to disassemble the
casing. Refer servicing to qualified
personnel only.
Should any solid object or liquid fall into
the player, unplug the player, and have
it checked by qualified personnel
before operating it any further.
On power sources
For battery backup, you may use a 9V
battery (optional), so that you will not
have to re-set the clock every time you
disconnect the power.
The nameplate indicating operating
voltage, power consumption, etc. is
located at the bottom of the set.
On operation
If the player is brought directly from a
cold to a warm location, or is placed in
a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In this
case, remove the CD and wait about
an hour for the moisture to evaporate.
This CD player is designed to be played
on a stable no vibration position. If you
bump the set during CD play, the music
will stop or skip for a few seconds. This
is normal for this type of player.
If you have any questions or problems
concerning your player, please contact
our customer service department at
1-800-315-5885 ( Monday~ Thursday
9:00 a.m. ~ 5:00 p.m., Friday 9:00 a.m.
~ 1:00 p.m. EST).
On placement
Do not leave the player in a location
near heat source, or in a place subject
to direct sunlight, excessive dust or
mechanical shock or vibration.
Do not place the player on an inclined
or unstable place.
Do not place anything within 1 inch of
the back of the cabinet. The ventilation
holes must be unobstructed for the
player to operate properly and prolong
the life of its components.
Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or spring-
wound watches away from the player
to prevent possible damage from the
magnet.