Lenoxx Electronics CD-61 CD Player User Manual


 
PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 21 tracks can be programmed).
Programming Example:
Program Number
1
2 3
4
5
6
7
8
Track Number (song number)
3
5
8
1
2
4
1
1
etc.
etc.
PROGRAMMING YOUR PLAYING SEQUENCE
During programming, the word
PGM
(program) shows in the display. To program
songs to play in your preferred order, follow steps below:
1.Press the PROGRAM button once in
stop mode.
The word
PGM
will show in the DISPLAY.
X 1
PGM
Program number
2.Press the SKIP/SEARCH button (
or
) to select track number 3 (example).
PGM
will flash in the display.
PGM
Track number
3.Press the PROGRAM button. Track 3 is
now programmed.
Program #2 will now show in the
display, ready for your next selection of
track.
X 1
PGM
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 21 selections).
5.After programming is finished, press
PLAY to begin programmed play.
shows in the display together with
PGM
,
and music begins.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY
button to re-start normal play.
Your programmed memory will be lost:
When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
When the power is shut off.
SKIP/SEARCH
PROGRAM PROGRAM
During CD play, the PROGRAM button functions the same as the REPEAT button.
The set must be in stop mode (as instructed on page 5) to program it.
7