Filter
Top Products
QUICK INSTRUCTIONS
MODEL CD-50
POWERING UP
Power your CD player by connecting an optional AC ADAPTOR or by inserting 4 size
AA fresh alkaline batteries.
BATTERY OPERATION
1. Open the BATTERY DOOR.
2. Insert 4 size AA fresh alkaline batteries as shown.
NOTE: Player will not work, and batteries will be
drained, if not inserted as shown on the back
cabinet near the BATTERY COMPARTMENT
DOOR.
4 SIZE AA
BATTERIES
3. Close the BATTERY DOOR.
NOTE: If the symbol
shows or flashes in the display,
your batteries are weak and need replacement.
PLUGGING IN
Plug the headphones into the PHONES JACK on the
left side of the player, and put on the headphones.
TO PHONES
JACK
VOLUME CONTROL
Adjust this VOLUME CONTROL to your preference.
1
CD-50(70A-0A9)QI121000 NL v.1 E
GET INTO STOP MODE (For Programming)
TOTAL TRACKS
TOTAL PLAYING
TIME
Press the PLAY/PAUSE button , the set begins to
play, then press the STOP (POWER OFF) button ,
the display will show six digits similar to the example
shown here.
NOTE: The only AC ADAPTOR suitable for this player is DC 4.5V 600mA, with polarity
, others may damage your player. Please check voltage + current (mA)
before buying an AC ADAPTOR.