Filter
Top Products
IB-CD203(AD)-WM-E-012503
TROUBLE SHOOTING
Problem
Remedy
The power is not on.
There is no sound.
Make sure the FUNCTION switch is at the right
position as you want.
Adjust the volume.
Unplug the headphones when listening
through speakers.
appears in the display even
when a CD is in place.
Insert the CD with the label side up.
CD does not play.
The sound is weak or has poor
quality.
Make sure the safety tab on the cassette is
in place.
Make sure the FUNCTION switch is at TAPE
position.
Clean the erasing head.
Replace all the batteries with new ones if they are
weak.
The tape does not record.
The sound is weak/The sound
quality is poor.
The sound drops out.
Cassette PLAY button pops up.
The tape has reached its end. Remove it, flip to the
other side and re-insert.
CD does not play while radio may
continue to play.
•
It is normal since the radio uses less power than the
CD player.
Tape jamming or tangling.
Use only better quality tapes.
Do not use a cassette with more than 90 minutes.
Make sure there are no loose layers of tape visible
before inserting the cassette.
17
The tape does not erase
completely.
Clean the heads, pinch roller and capstan.
Insert the AC plug into a wall outlet securely.
Make sure the batteries are installed correctly and
they are fresh.
Make sure that the CD compartment is closed.
Clean the CD.
Take out the CD and leave the CD DOOR open for
about an hour to dry moisture condensation.
Make sure the FUNCTION switch is at CD
position.
Clean the CD, or replace it if the CD is badly
damaged.
Place the player in a location free from vibration.
Check if your batteries are fresh.
General
CD player
Replace all the batteries with new ones if they are
weak, or bring the set near a window, or rotate the
set.
Radio
The RECORD button does not
function/The tape does not play.
Tape player
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette is in place.