Filter
Top Products
IB-CD163(TA)-FREDS-E-042602
ATTACHING THE SPEAKERS
1.Bring one of the speakers to the right side
of the set.
2.Align the rails of the speaker box with the
main set as shown in FIG.1.
3.When speaker align with the rails, push the
speaker into the rails as shown in FIG. 2.
4.Repeat above steps 1 to 3 for the left
side.
5.Carefully unwind the speaker wire from behind each speaker box and plug the
right plug into Speaker Jack R, also plug the left plug into Speaker Jack L (as
shown in FIG. 3). Wrap the remaining wire behind each speaker box.
FIG.1
FIG.2
FIG.3
NOTE: This set can be used with speaker boxes attached to the cabinet or
separated, just make sure both speaker plugs are plugged into the jacks.
5
LOCK TAB
To remove the speakers, press the lock tab and push the speakers out
of the rails.