Filter
Top Products
RANDOM PLARANDOM PLA
RANDOM PLARANDOM PLA
RANDOM PLA
YY
YY
Y
1. Press Random Button either in stop mode or normal play mode, the set will play all
of the songs in random order. The Display will show some moving symbols like
... ... every 5 seconds.
2. Press the Forward Skip/Search Button to skip to the next random song.
3. To resume normal play, press Random Button again.
CD OPERACD OPERA
CD OPERACD OPERA
CD OPERA
TIONTION
TIONTION
TION
PROGRAMMED MEMORPROGRAMMED MEMOR
PROGRAMMED MEMORPROGRAMMED MEMOR
PROGRAMMED MEMOR
YY
YY
Y
PLA PLA
PLA PLA
PLA
YY
YY
Y
Up to 16 tracks can be programmed for disc play in the order you like.
Programming can only be done during
STOPSTOP
STOPSTOP
STOP mode.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Under some conditions you may be able to program more than 16 tracks.
PROGRAMMED (MEMORPROGRAMMED (MEMOR
PROGRAMMED (MEMORPROGRAMMED (MEMOR
PROGRAMMED (MEMOR
Y) PLAY) PLA
Y) PLAY) PLA
Y) PLA
YBACKYBACK
YBACKYBACK
YBACK
1. During
STOPSTOP
STOPSTOP
STOP mode, press Prog/Repeat Button.
2. The Display will show and the Play/Prog
Lamp will flash.
3. Press the Skip/Search Buttons either or
until the desired track shows on the Display. The
Play/Prog Lamp will flash.
4. Press the Prog/Repeat Button. The Display will
show and the Play/Prog Lamp will flash.
5. Repeat steps 3 and 4 until all the desired tracks are
programmed.
NOTENOTE
NOTENOTE
NOTE: Programming can
onlyonly
onlyonly
only be done when the CD is in the
STOPSTOP
STOPSTOP
STOP mode. (CD is in
the set, Function Switch is in the CD position and Display shows the total
CD tracks.)
EXAMPLE: TEXAMPLE: T
EXAMPLE: TEXAMPLE: T
EXAMPLE: T
o program track 4 to play first.o program track 4 to play first.
o program track 4 to play first.o program track 4 to play first.
o program track 4 to play first.
When CD has stopped,
Press Prog/Repeat, will show and Play/Prog Lamp will flash.
Press the Forward Skip/Search Button till track 4 appears.
The Display will show and Play/Prog Lamp will flash.
Press Prog/Repeat, will show and Play/Prog Lamp will flash.
Press Play.
Track 4 will play first.
9
PLAY/PROG
PLAY/PROG
PLAY/PROG
6. When you finished programming, press the CD Play/Pause Button.
7. All songs will play in the order you programmed.
8. The Display will show the track number being played, and the Play/Prog Lamp will
remain flashing during programmed play.
9. If in middle of play, you want to hear the next programmed song, press
the Forward Skip/Search .
10. When all the songs have finished playing, the set will stop. The Play/Prog Lamp
turns off.
11. To turn off the power, remember to press Power Switch again, the Power/Batt.
Lamp will go off.
NOTENOTE
NOTENOTE
NOTE:For programmed tracks from 10th to 16th, the
display will separately show , ,
, , , and .
CD-149S042599 V.2
E
NOTE:NOTE:
NOTE:NOTE:
NOTE: The programmed memory will be cleared if CD door is opened or power is
turned off.