Filter
Top Products
To set the two-tone option, press the MODE button then the
CCHH SSEETT
up or down buttons until the display
appears. Press and release the MODE button again to select. Scroll through the sub-menu settings with
the up or down buttons, press the MODE button when
TTWWOO TTOONNEE
appears on screen. Settings include:
IINNDDIIVVIIDD
GGRROOUUPP
SSUUPPEERR GGRR
You can toggle
between these settings with the up or down buttons. When the desired setting appears on screen, press
the MODE button to select. Next, toggle between On and Off status settings which occur for each
above sub-menu.
Example:
IINNDDIIVVEE OONN
,
GGRROOUUPP OOFF
and
SSGGRRPP OONN
.
When the desired setting appears on screen, press the MODE button to select. The radio will save your
On or Off selection for the current channel and return to standby mode. NOTE: Individual, Group and
Super Group frequencies and timing are programmed by your radio communications Dealer.
For quick reference, the next few pages detail the Channel Options Menu, sub-menus and their settings.
System Option Settings Menu
To enter the System Option Setting Menu, press and release the MODE button during the receive or
standby mode, then use the up or down buttons until
SSYYSSTTEEMM
appears. Select the above option with a
press and release of the MODE button.
(Beep Set, VOX (Voice Operated TX) Set, Time-Out-Timer Set, Penalty, Busy Channel Lockout Set,
Marked Idle, Scan Set, Priority Scan, Transmit Delay, Power Save, Clear-To-Talk, Roger Beep, 2 tone
alarm, Microphone Hook and Audio Compander). Details on sub-menu settings follow.
You can toggle between these settings with the up or down buttons. When the desired setting appears
on screen, press the MODE button to select. If you choose the Beep Set setting, you will need to use the
up or down buttons to choose
BBEEEEPP OONN
or
BBEEEEPP OOFF
. When the desired setting appears on screen, press the
MODE button to select. The radio will save your On or Off selection and return to standby mode.
If you choose the VOX Set setting, you will also need to choose between On or Off selections, by using
the up or down buttons to choose, and the MODE button to select. If you choose On, you will need to
choose a VOX level setting, which includes:
VVOOXXLL LL11,, VVOOXXLL LL22
or
VVOOXXLL LL33
. You can toggle between these
VOX sensitivity level settings with the up or down buttons. When the desired setting appears on screen,
press the MODE button. The radio will save your selection and return to standby mode.
If you choose the Time-Out-Timer setting, your choices include:
TTOOTT OONN
or
TTOOTT OOFF
. Toggle between
the settings with the up or down buttons. When the desired setting appears on screen, press the MODE
button. If you choose “On”, you will need to choose the duration of the Time-Out-Timer setting, from 10
seconds to 990 seconds. Use the up or down buttons to toggle, until the desired number of seconds
appears on the display. Use the MODE button to select. The radio will save your selection and return to
standby mode. Example of display:
TTOOTT 999900
NOTE: In the Time-Out-Timer sub-menu, if “Off” is selected by pressing the MODE button, the TOT
function will be disabled, and the radio will return to standby mode.
If you choose the Time-Out-Timer Penalty setting, your choices include Penalty On or Off. Toggle
between the settings with the up or down buttons. When the desired setting appears on screen, press the
MODE button. If you choose “On”, you will need to choose the duration of the Penalty setting, from 1
second to 100 seconds. Use the up or down buttons to toggle, then the MODE button to select the
desired amount of time. The radio will save your selection and return to standby mode.
Example of display:
PPNNLLTT 110000
.
NOTE: In the Time-Out-Timer Penalty sub-menu, if “Off” is selected by pressing the MODE button, the
TOT Penalty function will be disabled, and the radio will return to standby mode.
NOTE: If the radio transmits in excess of the set time, it will beep an error tone and the radio will receive a
signal, but will NOT transmit during the penalty time.
If you choose the Busy Channel Lockout setting, your choices include:
BBCCLLOO OONN
or
BBCCLLOO OOFF
. Toggle
between the settings with the up or down buttons. When the desired setting appears on screen, press the
MODE button. Your radio will save your On or Off selection and return to standby mode.
NOTE: If you select “On”, and the channel is busy, it will inhibit transmission.
If you choose the Marked Idle setting, your choices include On or Off. Toggle between the settings with
the up or down buttons. When the desired setting appears on screen, press the MODE button to select.
The radio will save your selection and return to standby mode.
Example of display:
MMAARRKK OONN
.
NOTE: If the channel is set by Busy Channel Lockout, and transmit is inhibited, Marked Idle allows a
transmission when your CTCSS or DCS tone signal is received.
ENGLISH
9
ENGLISH
10
Mode Option Setting
Channel Option Setting Tone Option RX Tone No Tone
CTCSS 1-49
DCS
Invert DCS
023-754
023-754
TX Tone No Tone
CTCSS 1-49
DCS
Invert DCS
023-754
023-754
Tx Output Power High/Low
Normal Scan List
Priority Scan List
2-Tone Option Individual Tone
Group tone
Super Group Tone
On/Off
On/Off
On/Off
Power High/Low
Normal Scan On/Off
Priority Scan On/Off
Each Channel Setting
System Option Setting
Display Option Setting