Filter
Top Products
Back Panel
Speaker Output - This jack is used to deliver the amplified signal to an external speakers.
Total minimum load is 8 ohms. Do not use a load lower than 8 ohms. Damage to the amplifier
may result. The amplifier’s internal speaker is disconnected when this jack is used.
Line Output - this is a 2-conductor 1/4” line output jack. This will allow an external amplifier
or mixing board to be supplied with the signal from this amp.
Headphone Output - this is a 3-conductor stereo jack. The amplifier’s internal speaker is
disconnected when this jack is used.
CD/TAPE Input - this is a 3-conductor 1/4” jack that allows playback from a Compact Disc or
Tape player.
Dart 10FXELDOM
Hz06W52V021CA
NCINOITACIFILPMALACISUMMOTSUK
SAUOIHO,ITANNICNIC
ERBMUNLAIRES
SAUNIDENGISED NAIHCNIEDAM
2630
IRRVUOSAPEN-EUQIRTCELECOHCEDEUQSIR
ONITNETTA
ONITUAC
CKOHSCIRTCELEFOKSIR
ENPOTONOD
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
LINEOUTSPEAKER CD/TAPE
INPUT
HEADPHONE
ON
OFF
POWER
FUSE:T200mA L 250V
I
O
C
US
RR
2001124
LEAD
GUITA R
AMPLIFIERW/EFFECTS
5