Krix Seismix 3 Stereo System User Manual


  Open as PDF
of 8
 
Seismix 5: specications
Drivers
Bass Driver Nominal 305mm (12”) diameter paper cone driver developed for
high level, low frequency reinforcement and large linear cone travel
Electronics
Amplier Power 400 watts RMS into the nominal 4 ohm driver
Maximum instantaneous power 800 watts
Amplier S/N >70dB
Distortion - Input to Speaker <0.1% - @ 80 watts RMS
Line Level Inputs Left Input (mono) Lo – 900mV RMS for maximum output
Hi – 100mV RMS
Left + Right Input (stereo) Lo – 450mV RMS for maximum output
Hi – 50mV RMS
General
Frequency Range 16Hz - 150Hz (-6dB) in room response
Output 122dB maximum SPL in room response
Auto Power On / Off 15 minute delay before switching to standby after no input signal
Phase Select 0° or 180° (relative to input signal)
Cabinet
Enclosure Type Bass reex, front vented
Dimensions 460mm high x 395mm wide x 440mm deep
Material 19mm and 25mm MDF
Finish Vinyl or lacquered timber veneer
Weight 30kg
Due to continued development specications may change without notice
 previous