Krell Industries KST100 Stereo Amplifier User Manual


 
G. MONAURAL CONVERSION
AND OPERATION
The KST-100 can be easily cgnverted into a 400 watt
monaural amplifier. To switcla the amplifier to mono
follow these instructions.
1. Remove the topcover from the amplifier via 8 topcover
screws.
2. Find the toggle switch located at the rear of the ampli-
fier mounted on the circuitboard.. Mo.ve the toggle switch
over to the Mono setting printecl on tlae circuitboard.
3. Reinstall the topcover and the 8 topcover screws.
OPERATION
1. The input of the KST-100 in Mono operation is the
Left channel input only.
Connect the Left output of your preamplifier to the Left
channel input of the ~lesignated left channel mono ampli-
tier. Connect the rig~ht output of your preamplifier to the
left channel input ot the designated right channel mono
amplifier.
2. The output of the KST-100 in Mono operation is the
positive outside binding posts of each channel. The inside
Black binding post of each channel in mono is not opera-
tional.
Connect the left and right channel outer binding posts on
each amplifier to the loudspeaker.
NOTE: Pay careful attention to the labeling on the.
backpanel of the KST-100 when making input anti output
connections. Connecting this amplifier i~or monaural
operation can become confusing.
10