Filter
Top Products
UNPACKING
NOTE: Due to the extreme weight of the KSA amplifiers, it is strongly advised
that unpacking and placement is completed by at least two individuals.
1. Open the box.
2. Fold back the flaps on all four sides of the box and carefully roll it over on
to the exposed end.
3. Pull the box straight up and off exposing the foam packing material.
4. Pull the foam piece from the exposed end of the amplifier.
5. Roll the amplifier carefully onto its handles and remove the second piece
of foam.
The following items will now be visible:
i
i
i
i
4or5
KSA stereo amplifier
Remote control
Warranty card
AC power cord
Rubber feet bottoms (KSA-300S has 5 feet)
NOTE: If any’ of these items are not included, please contact your authorized
dealer immediately for assistance.
6. Remove the plastic bag from the amplifier.
NOTE: Save all packing materials. If you must ship your KSA in the future,
repack the unit in its original packaging to prevent transit damage. Should
the unit require service, send the remote control and AC power cord with the
amplifier.
CAUTION: Do not connect the power cord to the AC mains before completing
the Installation section.
PAGE 4