Filter
Top Products
7
IMPORTANT NOTES REGARDING PROTECTION CIRCUITRY
1. When the Output Protection circuitry has been engaged, allow at
least 20 seconds before turning on the amplifier again. Repeated
fast cycling of the On/Off switch can damage the amplifier and void
the warranty.
2. If the amplifier does not come on following the procedure above,
please contact your dealer.
3. There is a circuit breaker on the amplifier real panel. This breaker
protects the amplifier in the event of catastrophic failure. If the
circuit breaker engages, contact your dealer or the Krell Service
Department. Do not attempt to reset the circuit breaker.
G. WARRANTY AND SERVICE INFORMATION
There are no fuses or user-serviceable parts in the KSA-150 or KSA-250. Both
amplifiers have a limited warranty of five years from the date of purchase for
parts and labor. Return freight is included in the warranty. Please return the
warranty car immediately after successful installation and operation are
completed.
The warranty for Krell products is valid only in the country to which they were
shipped and at the Krell factory in Orange, Connecticut, USA. If there are
problems with any of your Krell products, please contact your authorized Krell
dealer or the Krell Service Department.
Please do not return any unit to Krell without first having contacted the Krell
Service Department and receiving a Return Authorization Number. Units should
be shipped in Krell packing. Packing materials may be purchased through the
Krell Service Department. Freight charges to the factory or distributor are the
responsibility of the customer. Krell or the dealer/distributor will pay return freight
charges on warranty repairs.