Filter
Top Products
24
Evolution 505 Operation
This section provides information about operating the Evolution 505. See Front
Panel /Remote Control Description, on pages 13-21, for more Evolution 505 play-
back features.
Power On
Press the back panel power switch (34) labeled “1”. When the Evolution 505 is ini-
tialized and in the stand-by mode, the red stand-by LED (2) on the front panel illu-
minates. Then press the power button (1) on the front panel or the power key on
the r
emote control, to place the Evolution 505 in the operational mode. When the
blue stand-by LED (2) illuminates, the Evolution 505 is in the operational mode and
ready to play a SACD or a conventional compact disc.
How to Play a Disc
1. Press the open/close button (7) or key, to open the disc transport.
2. Place the disc on the transport.
3. Press the open/close button or key again to close the disc transport. The front
panel display reads the total tracks and time on the disc.
4. Press the play button (6) or key. The format type is seen in the front panel dis-
play. The format type disappears, and the front panel display reads
TRACK 1 and
the track time as the disc begins playing.
5. Press the stop button (5) or key, and then the title button (13) or key in order to
select another disc format and view available tracks.
6. Adjust the volume level thr
ough your system volume contr
ol.
7. Pr
ess the stop button or key to end disc playback.
8. Press the play button or key to begin playback again, from the first track.
9. To return the Evolution 505 to the stand-by mode, press the power button (1)
or key.
SECTION FIVE