Filter
Top Products
6 ESD Ceiling Speaker - Installing the ESD Ceiling Speaker
4 Installing the ESD Ceiling Speaker
This section explains how to install the ESD Ceiling Speaker, that is:
• Choosing the best place to locate your speaker (see
Section 4.1
• Connecting the wires (see
)
Section 4.2
• Determining the number of speakers (see
)
Section 4.3
• Preparing the speaker for operation (see
)
Section 4.4
• Installing the tile size speaker (see
)
Section 4.5
• Installing the half-tile size speaker (see
)
Section 4.6
4.1 Choosing the Best Location
)
Ideally, locate the speakers above the main listening area. Before doing so, be
sure that:
• The desired location is free of obstructions, such as electrical piping,
AC ducts or water lines, and so on
• There is enough space behind the mounting surface for the speaker
• The rear side of the speaker is not blocked by wall studs or other objects
4.2 The Input Pinout
Figure 3 illustrates the terminal block pinout for mono and stereo models
respectively:
Figure 3: ESD Ceiling Speaker Input Pinout
The red wire connects to the + pin and the black wire connects to
the – pin.
Mono Model Pinout Stereo Model Pinout
INPUT
R L
INPUT
i