Kompernass KH 2333 CD Player User Manual


  Open as PDF
of 6
 
76
4. Press the F-SKIP ᕧ or the
R-SKIP ᕦ key for a few seconds and
release the key. The automatic transmission
now starts searching the first transmission
with adequate signal strength.
5. Repeat the process to set other transmis-
sions.
To set the transmission with weak signal
strength:
6. Press the F-SKIP ᕧ or the
R-SKIP ᕦ key continuously until you get
the desired frequency or the reception is
optimal.
Save the radio transmission
1. Press the TUNER/BAND µ key again to
sent the transmission range (MW/UKW).
2. Search the desired transmission as descri-
bed under the point "Transmission search".
3. Press the MEMORY/ PROG. 4 briefly. The
indication "PROG“ appears in the display and
the memory position “01“ blinks.
4. Press the ALBUM/PRESET+ Ƹ or
ALBUM/PRESET- ƹ key to save the
current transmission in another memory
position (1-10).
5. Press the MEMORY/ PROG. ᕤ key again.
The previously set transmissions are written
in the memory.
6. Repeat the process to save other transmis-
sions.
Selecting the saved radio transmissions
➜ Press the ALBUM/PRESET+ Ƹ or
ALBUM/PRESET- ƹ key to select a memo-
ry position between 1-10.
Note: (Mains or battery operation)
Make sure that both the (UM-3/“AA“) batteries
have been inserted. The saved radio transmis-
sions are thus received even if there is a drop in
the mains voltage.
CD/MP3-CD operation
Inserting the CD/MP3-CD
1. Press OPEN/CLOSE to open the
CD slot.
2. Place the CD/MP3-CD in the CD slot.
3. Press OPEN/CLOSE to close the
CD slot. The CD/MP3 player starts and
reads the contents of the CD/MP3-CD.
After a few seconds, the total playback
time and the number of the current track
appears in the display.
Playing back the inserted CD
1. Press the PLAY/PAUSE ᕨ key.
- The playback begins with the first track of
the CD.
- The display shows the current track num-
ber and the previous playback time.
- The CD player stops when all the tracks
have been played. The total playback time
as well as the number of the current track
are shown in the display.
2. Press the STOP ᕣ key to stop the play-
back.
3. Press the PLAY/PAUSE ᕨ key to interrupt
the playback. (The playback should be pre-
viously activated).
4.
Press the PLAY/PAUSE ᕨ key again
to conti-
nue the playback.
Selecting different tracks during
playback
➜ Press the F-SKIP ᕧ or the R-SKIP ᕦ key
until the desired track appears in the
display.
Only for MP3-CDs:
➜ Press the ALBUM/PRESET+ Ƹ or
ALBUM/PRESET ƹ key once or multiple
times to find the desired album.
Restarting the current track
➜ During the playback, press the R-SKIP ᕦ
once. Playback of the current track restarts.
Searching a song passage during the
playback
➜ Press and hold the F-SKIP ᕧ or R-SKIP ᕦ
key to search the desired song passage.
The playback continues when you release
the F-SKIP ᕧ or R-SKIP ᕦ key.
Search function
Possible only for playing back MP3-CDs:
➜ Press the FIND ¸ key to call the MP3-CD
search function.
Searching with the help of the file name
➜ Press the FIND ¸ once to call the MP3-CD
search function.
and the alphabet "A" appears in the
display. If a file name begins with the alpha-
bet "A“ beginnt, it appears in the display as
well.
➜ Press the F-SKIP ᕧ or
R-SKIP ᕦ key to search from A-Z and 0-9.
➜ Press the PLAY/PAUSE ᕨ key to begin
playing back the desired track.
Searching with the help of the album name
➜ Press the FIND Ƹ key twice to call the
search function. and the "ALBUM“
appears in the display.
➜ Press the F-Skip ᕧ or R-SKIP ᕦ key to
search the desired album.
➜ Press the PLAY/PAUSE ᕨ key to start play-
ing back the album.
Text display (ID3 display)
➜ While playing back an MP3-CD, press the
FIND ¸ key for two seconds. The file
name/ track/ artist/ album of the current
track appears in the display.
➜ Press the FIND ¸ key once again for two
seconds to go to the playback time display.
Note: The device is compatible with ID3 V.1, V.2
only.
Track programming
Up to 64 tracks can be stored.
CD playback
1. Insert the CD in the device, as described
under "Insert the CD“.
2. Press the MEMORY/PROG. ᕤ key to start
the programming.
3. Press the F-Skip ᕧ or R-SKIP ᕦ key to
find a particular track.
4. Press the MEMORY/PROG. ᕤ key to write
the track in the memory.
5. Repeat the process until you have written
all the tracks in the memory.
6. Press the PLAY/PAUSE ᕨ key to playback
the automatically created programme.
7. Press the STOP ᕣ key to stop the play-
back.
MP3-CD playback
1. Insert the CD in the device, as described
under "Insert the CD“.
2. Press the MEMORY/PROG. ᕤ key to start
the programming.
3. Press the F-SKIP ᕧ or R-SKIP ᕦ key to
find the desired album/ folder.
4. Press the MEMORY/PROG. ᕤ key to write
the album/ folder in the memory.
5. Press the F-SKIP ᕧ or R-SKIP ᕦ to find
the desired track.
6. Press the MEMORY/PROG. ᕤ key to write
the track in the memory.
7. Press the PLAY/PAUSE ᕨ key to playback
the automatically created programme.
8. Press the STOP ᕣ key to stop the play-
back.
Checking the programming
1. Press the MEMORY/PROG. ᕤ to take a
look at the stored track. The first pro-
grammed track appears in the display.
2. Press the MEMORY/PROG. ᕤ key again to
go to the next track.
GBGB
KH2331-2333_Boomboxen_UK 02.03.2005 14:03 Uhr Seite 6
 previous