Filter
Top Products
- 16 -
What to Do in the Event of
Reception Problems
Reception disruptions, such as an unclear or distor-
ted picture could have the following causes:
• The indoor antenna is not correctly oriented.
Every station requires an individual orientation.
For this reason, reorient the indoor antenna
every time after changing the station.
• There are obstacles in the reception range
of the indoor antenna.
Attempt to remove the obstructions or place the
antenna at a different location.
• There is electromagnetic interference in the
immediate vicinity.
Try to eliminate the interference if, for example,
it is caused by other appliances (mobile tele-
phone, micro-wave, etc.).
• Interference due to overmodulation.
Try to eliminate the interference by reducing
the amplifier gain by turning the regulator
4
anti-clockwise.
The reception characteristics of the indoor
antenna are only good if you are close
enough to the broad-casting station.
Cleaning and Care
Risk of electric shock
• Before cleaning, always pull the plug out
of the plug socket.
• Never submerge the indoor antenna into
water or other liquids during cleaning.
➭ Clean the indoor antenna only with a dry,
lint-free cloth.
To avoid damaging the appliance, never use
solvents for cleaning.
Disposal
Do not dispose of the appliance in
your normal domestic waste.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
This product is subject to the European directive
2002/96/EC.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_KH2329_GB_LB5 14.01.2008 16:32 Uhr Seite 16