Filter
Top Products
- 4 -
Operation
Switching On and Off
• To switch the radio on, turn the On/Off switch
with volume controller
q
to the left, until you
feel that a slight resistance has been overcome.
• To switch the radio off, turn the On/Off switch
with volume controller
q
to the right, until you
feel that a slight resistance has been overcome.
To control the Volume
• Turn the On/Off switch with volume controller
q
to the left to increase the sound volume.
• Turn the On/Off switch with volume controller
q
to the right to reduce the sound volume.
Radio functions
Switch the radio on.
Selecting a waveband
• Press the button AM
w
for medium wave (MW)
resp. the button
FM
y
for short wave (VHF)
reception.
• Extend the FM wire antenna
d
out.
Adjusting the frequency
• Using the frequency regulator
u
adjust the
desired frequency on the AM (kHz) resp. FM
(MHz) scale
a
.
• Adjust the wire antenna
d
positioning so that
radio reception is optimal.
Displaying the date and time
Press the button SET
t
...
...1x, to show the set alarm time.
...2x, to show the date.
...3x, to show the running seconds.
After about 2 seconds the display reverts to its nor-
mal time display.
Adjusting Time and Date.
1. Press one of the buttons MODE
r
four times.
The number of the month is shown.
2. With the button SET
t
adjust the month.
3. Press one of the buttons MODE
r
.
The number of the date is shown.
4. With the button SET
t
adjust the date.
5. Press one of the buttons MODE
r
.
The hour indicator appears.
6. With the button SET
t
adjust the hour.
For time display in the 12 hour format, select
the hours 1-11 A for the hours of the forenoon
and the hours 12-11 P for the hours of the after-
noon.
For time display in the 24 hour format, select
the hours 0-23 H.
7. Press one of the buttons MODE
r
.
The minute indicator appears.
8. With the button SET
t
adjust the minute.
9. Press one of the buttons MODE
r
.
The time display is now programmed.
Adjusting the alarm signals
You can programme an hour signal or an alarm
time to have yourself alerted with an alarm signal.
1. Press the button MODE
r
once, to display the
alarm time adjustment.
2. Press one of the buttons SET
t
several times
to adjust the alarm sound for the alarm time
or the hour signal:
: Alarm sound for alarm time
(Alarm signal for wake-up time)
+
: Alarm sound for alarm time and hour
signal
(Alarm signal for wake-up time and for
each full hour)
: Alarm sound for hour signal
(Alarm signal for each full hour)
no symbol:
no alarm time or hour signal programmed.
IB_KH2282_E6275_EN.qxd 13.11.2007 15:21 Uhr Seite 4