Filter
Top Products
9
7.2 Using the tape unit
Warning: Always press the STOP / EJ but-
ton first and let the tape stop before you
switch modes. This will prevent damage and
the device wearing out prematurely.
K The button symbols mean the following
for tape mode:
̇ PLAY = play a tape
❙❙ PAUSE = stop/start pause
<< FFWD = fast forward
>> REW = rewind
● RECORD = record
■ STOP/EJ = stop and eject tape
The tape stops automatically at the end of
the tape.Remove the tape, turn it over, and
replace to play or record on the other side!
7.3 Recording from the radio
൶ Select "RADIO" on the FUNCTION
switch.
When you find a radio station you want to
record from:
● Press RECORD to start recording.
❙❙ Press PAUSE to pause the recording.
■ Press STOP/EJ to stop recording.
Note: The recording volume is controlled
automatically and is not determined by the
volume control switch.
7.4 Recording from CD
൶ Select the "CD" FUNCTION switch.
● Press RECORD and simultaneously ...
❙❙ the PAUSE key.The device is now
ready to record.
Press PAUSE (deactivate) again as soon
as the CD is started.
Press PAUSE again to interrupt recor-
ding.
■ Press STOP/EJ to stop recording.
Note:The recording volume is controlled
automatically and is not determined by the
volume control switch.
8. Cleaning and maintenance
Never open the device housing.There are
no operating elements inside. An opened
device housing could cause potential life
endangerment through electric shock.
Before cleaning the outside of the device,
…
•First remove the mains connector from
the mains socket.
൶ Select the "TAPE" FUNCTION to order
to switch the device off.
•If batteries are still in the device: Only
remove the large batteries, not the small
ones. Otherwise the stored radio chan-
nels will be lost.
•Close all openings, i.e. the battery com-
partment, tape and CD trays.
KH2262_LB4_UK_Ka 13.11.2003 14:04 Uhr Seite 10