11
LCD display.
• The current setting HH.MM (hours:minutes) and the
day of the week display start to flash.
• Use »UP« to adjust the setting in increments of 1 minute.
• Use »DOWN« to adjust the setting in decrements of
1 minute.
• Keep the »UP« or »DOWN« button pressed to change
the time quickly in 10 minute increments or decrements.
• Press »SNOOZE« to change the alarm operation cycle
between daily (all seven days of the week) and
weekdays (Monday to Friday).
• Press the »AL. 1«
ቤ or »AL. 2« ቧ button again to select
either a music or tone wake-up alarm.
Wake-up type LCD display (on right in display)
Wake-up tone Symbol 'BELL 1'
Radio Symbol 'MUSIC 1'
Off Nothing displayed
Note: The alarm wake-up function is only activated if
one of the two wake-up types (music or tone) is set.
• If within 15 seconds, there has been no further setting
made then the current settings are activated and the
device goes back into automatic operation.
2.8 Alarm wake-up function
• When the actual time (clock) and the set alarm wake-up
time are identical, the alarm wake-up function is
switched on.
• When the alarm switches on, then the Sleep Timer,
if in operation, is immediately ended.
• Alarm with wake-up tone,
a) 4.5 kHz wake-up tone sounds
b) Radio is silenced, even if it is switched on.
c) The wake-up tone sounds for 10 minutes.
• Alarm with radio,
a) The radio switches itself on (the last selected station)
b) The radio plays for a maximum of 60 minutes
• By pressing the »SNOOZE/RADIO OFF«
ብ button you can
put off the alarm wake-up by 9 minutes (Snooze alarm
function). The wake-up function is interrupted and
resumed after 9 minutes.
• To stop the alarm wake-up, press the appropriate »AL.1«
or »AL. 2« button.
KH_2024_GB 23.07.2003 10:57 Uhr Seite 11