Filter
Top Products
Wiring:
Gently connect all HDMI inputs and outputs with the shortest
HDMI cables you can find. Make sure the HDMI cables and
especially the connectors are top quality.
Connection and Operation:
After connecting the HDMI wires, insert the 5 volt plug on the
power supply to the HDMIDA2. Next plug the AC side of the
power supply into the wall outlet. Turn on the power switch.
Troubleshooting:
If the HDMIDA2 does not appear to be functioning, make certain
the source and the destination devices connected are
functioning and turned on. Reconnect the devices using
maximum 3 meter (10 foot) long cables (in other words make
sure the problem is not long cables in which case a HDMI balun
may be required). If the signal is present then make sure the
HDMIDA2 is getting power. If it still does not work carefully
inspect the cables and connectors for any damage.
Non HDCP Compliant Devices:
If a destination device does not appear to work, make certain
that the device is HDCP compliant. A non-HDCP compliant
device will not work with a signal that has HDCP encoding
present.
If problems are experienced with this product, please call our
tech line for help at 1 800 566 5579.