Knoll GSZ67 Stereo Amplifier User Manual


 
15
MR164 Source Input Labels
As of version 1.0 the source labels are: CD, CD2, FM, AM/FM, SAT, SAT2, AUX,
AUX2, MP3, TV, DVD, DVD2, PC, DEC, MC-PC, MCEx, Jazz, Pop, Country, News,
Classic, Hiphop, Rock, Contemp, Rap, Sports, Talk, Ipod
Source 1______________________ Source 2_____________________ _
Source 3______________________ Source 4_____________________ _
Source 5______________________ Source 6_____________________ _
Source 7______________________
Date of Installation
____________________200______
GSZ67
Gain
SPEAKERS 1 SPEAKERS 2 SPEAKERS 3 SPEAKERS 4 SPEAKERS 5SPEAKERS 6
1L
1R
L
R
IN 1 OUT
2L
2R
L
R
IN 2 OUT
3L 3R
L
R
IN 3 OUT
4L
4R
L
R
IN 4 OUT
5L
5R
L
R
IN 5 OUT
6L 6R
L
R
IN 6 OUT
7L 7R
L
R
IN 7 OUT
RS232
Key1 Key2Key3 Key4 Key5Key6
Al l speaker loads 4-16 ohms, ideal 6-8 ohms
Pass Trig
IR6IR5IR4IR3IR2IR1IR All
Paging In Data Out L Out5 R L Out6 R
Line level outputs
POWER
850 W
Connect computer or
whole house controller
here. Keypad may not
be required if RS232
is used.
Connect room
speaker to
detachable
connectors
12-16 gauge
wire preferred.
Connect the sources via
good quality gold RCA jacks
to inputs 1 through 7.
Connect these fully buffered outputs to the
source inputs on a second GSZ67 or a receiver
without needing Y cords. These outputs are not
affected by volume or source changes.
Connect paging
or doorbell input
to this STEREO
3.5 mm jack.
Connect a
2nd GSZ67
to this
STEREO
3.5 mm jack
to get ALL
zone
features.
Connect infrared to IR54 or IR55
connection block. Do not connect
an emitter directly without a 220R
resistor in series or the emitter
will fail after a short time. IR1 is
the infrared output from the MR164
in KEY1. IR All is the output from
all six keypad slots.
Connect these RJ45 connectors to
rooms with MR164 keypads. Two MR164
keypads can control one zone, maximum
nine MR164 keypads per GSZ67.
Pass stereo
3.5 mm jack
connects to
all MR164
and is for
future use.
Trig mono
3.5mm jack
has 12 VDC
(100 mA max)
on it when any
zone is active.
Line level outputs
give zone 5 and 6
the ability to
connect to more
powerful amplifiers.
Both are volume &
source controlled.
Power
connection.
Observe
correct
voltage.