Filter
Top Products
Wiring:
Gently connect all HDMI inputs and outputs with the shortest
HDMI cables you can find. Make sure the HDMI cables and
especially the connectors are top quality.
Connection and Operation:
After connecting the HDMI wires, insert the 5 volt plug on the
power supply to the HDMIDA8. Next plug the AC side of the
power supply into the wall outlet. Turn on the power switch.
Troubleshooting:
If the HDMIDA8 does not appear to be functioning, make certain
the source and the destination devices connected are
functioning and turn on. Reconnect the devices using maximum
3 meter (10 foot) long cables (in other words make sure the
problem is not long cables in which case a HDMI balun may be
required). If the signal is present then make sure the HDMIDA8
is getting power. If it still does not work carefully inspect the
cables and connectors for any damage.
Non HDCP Compliant Devices:
If a destination device does not appear to work, make certain
that the device is HDCP compliant. A non-HDCP compliant
device will not work with a signal that has HDCP encoding
present.
If problems are experienced with this product, please call our
tech line for help at 1 800 566 5579.