Klipsch SB 3 Speaker System User Manual


  Open as PDF
of 2
 
Quick Setup Guide - Connecting The Klipsch HD Theater SB 3
Step 2
Step 1
Step 3
Step 4
24V – 2.5A
60W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
24V – 2.7A
65W
R
L
DC IN
POWER
ONOFF
1 2SOURCE
OFF ON
24V – 2.7A
65W
R
L
DC IN
POWER
ONOFF
1 2SOURCE
Soundbar Connection Panel
Television Connection Panel
Digital Optical Cable
(Not Supplied)
POWER
OFFON
SUBWOOFER
VOLUME
MAXMIN
AC~100-240V
50/60Hz
90W
24V – 2.5A
60W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
Soundbar Connection Panel
Power Supply
and AC Cord
Once you have placed the Klipsch HD Theater SB 3 soundbar
where you want it either below or above your TV, connect one
end of an optical digital cable (not supplied) to your TV’s
optical digital audio output jack and connect the other end of
the cable into the optical input jack on the rear of the soundbar.
NOTE: THE SOURCE BUTTON ON THE SOUNDBAR SWITCHES
INPUTS BETWEEN OPTICAL, L/R RCA, AND 3.5 MM.
Next, plug the AC power cord into the soundbar power supply,
then connect the power supply into the DC Input on the rear of
the soundbar. Plug the AC power supply into a “live” electrical
outlet and turn the soundbar’s Main Power switch on the rear
of the soundbar to “On”. On the front of the soundbar, make
sure the left status light is either solid green or orange (press
any button once if light is steady red).
Last, after placing the Klipsch HD Theater SB 3 subwoofer
where you want it in the room, take the subwoofer AC power
cord and plug one end into the “AC Input” on the back of
the subwoofer and the other end into a nearby “live” power
outlet. Turn the subwoofer Main Power switch on the back of
the subwoofer to “On”. The red light will turn on until it finds
the wireless signal coming from the soundbar. Once it finds
that signal (approximately 15 seconds), the solid red light will
change to solid blue, indicating the subwoofer is now con-
nected to the soundbar. Your Klipsch HD Theater SB 3 system is
now ready to operate!
(For more information, refer to the owner’s manual)
© 2012 Klipsch Group, Inc.
POWER
OFFON
SUBWOOFER
VOLUME
MAXMIN
AC~100-240V
50/60Hz
90W
24V – 2.5A
65W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
Subwoofer Rear Connection Panel
Status Light
AC Power Cord
 previous