Klipsch SB-3 Speaker User Manual


 
CAUTION:
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this
device. There are no user-serviceable parts inside. Refer repairs to a Klipsch authorized service center.
AVIS: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to caution you to
uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclama-
tion point inside a triangle is intended to alert you to the presence of important operating, maintenance
and servicing information in the manual accompanying the device.
CAUTION! To prevent electrical shock, match the wide blade of the plug on the power cord to the wide
slot on the power outlet and insert fully. ATTENTION: Pour eviter les chocs electriques, introduire la
lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.
1. Read Instructions. All safety and operating instructions should be read before operating the device.
2. Retain Instructions. The safety and operating instructions should be retained for future reference.
3. Heed Warnings. All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructions. All operating and safety instructions should be followed.
5. Water and Moisture. The device should never be used in, on or near water due to risk of fatal shock.
6. Carts and Stands. The device should only be used on carts or stands recommended by the
manufacturer.
7. Wall and Ceiling Mounting. The device should be mounted on a wall or ceiling only as recommended
by the manufacturer.
8. Ventilation. The device should always be located in such a way that it maintains proper ventilation.
It should never be placed in a built-in installation or anywhere that may impede the flow of air
through its heat sink or ventilation openings.
9. Heat. Never locate the device near heat sources such as a radiator, floor register, stove or other heat
generating device.
10. Power Supply. The device should only be connected to a power supply of the type described in the
operating instructions or as marked on the device.
11. Polarization. This product is equipped with a polarized line plug that has one blade wider than the
other. To prevent electrical shock, match the wide blade of the plug with the wide blade slot of the
receptacle and insert fully.
12. Power Cord Protection. Power cables should be routed so they are unlikely to be stepped on or
crushed by items placed on or against them. Pay special attention to where the plug enters a socket
or fused strip and to where the cord enters the device.
13. Cleaning. The device should be cleaned in accordance with the manufacturer’s instructions.
14. Periods of Non-Use. The device should be unplugged from the wall outlet when it is not in use for
extended periods.
!
!
!
!