Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5.
DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than
the other.A grounding type plug has two blades and a third
grounding prong.The wider blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus.When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused
for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
WARNING:To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
W
ARNING
:
Voltages in this equipment are hazardous to life.
No user-serviceable parts inside. Refer all servicing to qualified
service personnel.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Your new Klipsch architectural subwoofer has been designed to
deliver g
reat sound while remaining unobtrusive wherever you
install it.
The RW-5802 can be used whenever a free standing
subwoofer cannot be installed.The RW-5802, has been
designed to be used only with the RSA-500 amplifier. The
RSA-500 can be used with one or two RW-5802 modules to
maximize your results.
Minimum Tools Required for Installation
#2 Phillips Screwdriver
Wire strippers
Level
Stud finder
Saw
In-Wall Speaker Placement
Designed to function in any standard wall the RW-5802 in-wall
subwoofer is engineered for years of performance. Minimum
construction requirements call for drywall or other mounting
surfaces to be at least 1/2" thick.
To maximize performance, install the RW-5802 low and near a
corner if possible.Try to avoid placing in locations where the
adjacent area would be disturbed by any sound that could
transfer through to the other side of the wall.
Speaker Installation (for New Construction, skip to step #3)
1. Cut the appropriate size opening in the wall or ceiling using
the template provided. If the template is not available, cutout
dimensions are provided on the Klipsch website, at
www.klipsch.com. Sizes listed are minimum. If accuracy of
cut cannot be achieved,
you ma
y add 1/4" to each
dimension.
Be careful not to cut through any existing wiring
or plumbing.
Avoid compromising any fire stops
between studs.
English