Filter
Top Products
PAIRING
Before using the headset for the first time it must be paired with a Blue-
tooth device (mobile phone, etc.).
1. Ensure the headset is off.
2. Hold the Power/Pairing button for 5 seconds. The headset will turn on
then the status indicator will rapidly flash
3. Turn on Bluetooth on the device and set it to search for Bluetooth
devices.
4. Select “Klipsch BT ImageONE” from the device list.
5. If prompted to enter a passcode enter 0000.
Once a device has been paired the headset will remember it. When the
headset is turned on it will automatically scan for remembered devices,
beginning with the most recently paired. Up to 8 devices are memorized.
TURNING ON/OFF
B B B B B
B B B B B
R R R R R
R B R B
Hold 3 seconds
Status Indicator
ON
OFF