Filter
Top Products
2
SOLOCLASSICSUBWOOFER
SOLOCLASSICSUBWOOFEROwner’sManual
The KICKER Solo Classic subwoofers are built to bring you the best quality bass in a limited space, such
as behind the seat of your truck or in the hatchback of your car, leaving you with plenty of storage space
while offering high-performance and high-SPLs in smaller, sealed enclosures.
WIRING
Solo Classic subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be
connected to a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired
in parallel (make certain that your amp is 1 stable) or a 4 load if wired in series. The dual 4 woofer
will provide a 2 load when wired in parallel or an 8 load when wired in series. The terminals with the
white dots are for the fi rst voice coil. The terminals with the solid-red and solid-black markings are for the
second voice coil. See Figures 1 and 2.
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model S8C S10C S12C S15C
Nominal Impedance [Zn], ohm [per coil] 2 or 4 2 or 4 2 or 4 2 or 4
Resonance Frequency [fs], Hz 38 27.7 26 18
Power Handling Watts, Peak (RMS) 600 (300) 900 (450) 1200 (600) 1500 (750)
Sensitivity [SPLo], dB @ 1W, 1m 82.7 86.2 87.2 88
Total Q-Factor [Qts] .567 .368 .464 .391
Mechanical Q-Factor [Qms] 11.65 10.63 10.19 9.74
Electrical Q-Factor [Qes] .596 .381 .486 .407
Effective Excursion [EXmax™] in (cc) .44 (1.1) .61 (1.6) .61 (1.6) .69 (1.8)
DC Resistance [Re], ohm 6.91 6.98 7.04 7.84
S8C / S10C / S12C / S15C
Models:
SPECIFICATIONS
Series Wiring
Parallel Wiring
Dual 2 Voice Coils = 4 Load
Dual 4 Voice Coils = 8 Load
Dual 2 Voice Coils = 1 Load
Dual 4 Voice Coils = 2 Load
Figure 1
Figure 2
Coil 1
+
Coil 1+ Amplifi er +
Speaker
Connection
Amplifi er
+
Speaker
Connection
Amplifi er -
Speaker
Connection
Amplifi er -
Speaker
Connection
Coil 2+
Coil 2+
Coil 2-
Coil 2-
Coil 1-
Coil 1-
2009 SC Multilingual e01.indd 22009 SC Multilingual e01.indd 2 7/29/2010 4:44:47 PM7/29/2010 4:44:47 PM