Kicker ES154 Speaker User Manual


 
8
Installation
Panel Dimensions for Minimum Recommended Sealed Enclosures using 3/4” (1.9 cm) thick MDF:
1 in = 2.54 cm
1 in = 25.4 mm
1 ft
3
= 28.32 L
Model
ES104
ES124
ES154
Volume, ft
3
(L)
1.0 (28.3)
1.25 (35.4)
2.25 (63.7)
Panel A
13.5 x 13.5
14.5 x 14.5
17.25 x 17.25
Panel C
12 x 12
13 x 13
15.75 x 15.75
Panel B
13.5 x 12
14.5 x 13
17.25 x 15.75
Note: All sealed box airspace should be filled to 50% loose poly-fil stuffing. Please allow two weeks of break-in time for the
ES Subwoofer to reach optimum bass performance.
ES Ported (Vented) Enclosure Applications
Ported ES Subwoofers? Absolutely...and with a vengeance! These enclosures incorporate huge tube ports with high-impact air
velocities for sheet metal bending street bass that will make your “skin bounce on your bones!” These boxes are the enclosure of
choice for outrageous street bass and high performance SPL contests.
The ported Compact design increases bass efficiency and fits in many space-limited applications. Although it is the smallest
recommended ported enclosure, the output from 30 to 80 Hz will be considerably higher than that of any sealed box. The two other
ported designs have proportionately more output in this crucial frequency band.
The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers the sonic output needed to
win SPL contests and it produces bass notes “all the way down to tha cella”. This design turns heads and jump starts your heart.
If space is not a problem and you want to get the most from your ES, try one of these ported designs. You will not be
disappointed.
The following page shows a chart with the three Recommended Circular Port Enclosure sizes for each ES driver.
ES Subwoofers