Filter
Top Products
PERFORMANCE
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
2
INSTALLATION
COMPVTSUBWOOFER
Owner’sManual
CVT12 / CVT10
Models:
COMPVTSUBWOOFER
3
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
_________________________
_________________________
_________________________
_________________________
SealedEnclosureApplications
The CompVT generates more sound pressure than competing subwoofers on the market and excels
when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest
response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive
amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.
The CompVT high performance suspension system can operate in a larger sealed enclosure. This
maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ
enclosure generates a very flat response curve and superbly extends the subbass response.
CompVT subwoofers perform well in any size sealed enclosure between the Compact and SQ volume
recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact
bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the
recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations
have been calculated with the airspace inside the enclosure and include the displacement of the woofer.
All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not
make the airspace greater than the SQ, maximum enclosure volume, recommendation.
Model:
CVT10
CVT12
SealedSQ (MaximumEnclosureVolume)
3 ft
3
(85L) Power Handling = 300W RMS
4.6 ft
3
(130L) Power Handling = 300W RMS
SealedCompact (MinimumEnclosureVolume)
.8 ft
3
(22.7L) Power Handling = 400W RMS
1 ft
3
(28.3L) Power Handling = 400W RMS
Model:
CVT10
CVT12
Panel B, in (cm)
18 x 30.5 (45.7x77.5)
18 x 36 (45.7x91.4)
Panel A, in (cm)
3 X 16.5 (7.6x41.9)
3.125 x 16.5 (7.9x41.9)
Volume, ft
3
(L)
.8 (22.7)
1 (28.3)
Panel C, in (cm)
3 x 30.5 (7.6x77.5)
3.125 x 36 (7.9x91.4)
Panel Dimensions for CompactSealedEnclosures using 3/4” (1.9cm) thick MDF: (See Figure 3)
Model:
Nominal Impedance [Zn], ohm
Resonance Frequency [fs], Hz
Power Handling Watts, Peak (RMS)
Sensitivity [SPLo], dB @ 1W, 1m
Effective Excursion [EXmax™], in (mm)
DC Resistance [Re], ohm
Mechanical Q-Factor [Qms]
Electrical Q-Factor [Qes]
Total Q-Factor [Qts]
Equivalent Volume [Vas], ft
3
(L)
Net Displacement, in
3
(cc)
Outer Frame Diameter, in (cm)
Hole Cut-Out Diameter, in (cm)
Mounting Depth, in (cm)
CVT12
2 or 4
32.3
800 (400)
87.1
.498 (12.64)
2.16
10.16
.546
.518
2.15 (61.0)
52.4 (860)
12 1/2 (31.8)
10 15/16 (27.8)
4 5/16 (10.9)
CVT10
2 or 4
32.7
800 (400)
87.2
.501 (12.73)
2.13
9.56
.461
.440
1.30 (37.14)
48.2 (790)
10 5/8 (27)
9 1/8 (23.2)
4 3/16 (10.7)
Performance
The Kicker CompVT subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive
environment. CompVT subwoofers are versatile and surpass the competition in a sealed or vented box.
The ultra-thin mounting depth make the CompVT subwoofers ideal for custom installations and space-
limited applications. See Figure 1. They are made of advanced materials and construction techniques to
maintain optimal performance for years to come.
Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance
from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.
Note: All specifications and performance figures are subject to change. Measurements based on 2 ohm voice coil models.
Please visit the www.kicker.com for the most current information.
Figure 1
Comp Subwoofer
CompVT Subwoofer
To make the most efficient use of space when building the compact sealed enclosure for your CompVT
subwoofer, you must use the included clearance plate. The clearance plate allows the CompVT
subwoofer to sit recessed within the back panel of the subwoofer box to minimize the enclosure’s
depth. The clearance plate must seal tightly. First, use a plunging router, straight-cut bit, and a circle jig
to create a 1/16” (2mm) deep recess with an outer diameter of 6 1/2” (16.7cm) and an inner diameter
of approximately 5” (12.7cm). Center the recess behind the subwoofer on the back panel. Then, cut a
5 1/4” (13.3cm) diameter hole in the center of the recess all the way through the back panel. Using the
clearance plate as a reference, drill the six screw holes with a #29 (0.136”, 3.5mm) drill bit. Next,
countersink each screw hole using a 1/4” (6mm) drill or countersinking bit so the clearance plate will fit
tightly against the back panel. Remove the paper backing from the foam gasket and adhere it to the
inside of the clearance plate. Then, fasten the clearance plate to the box with six #8 screws.
5 1/4” (13.3cm)
cut out
diameter
6 1/2” (16.7cm)
recess outer
diameter
Clearance Plate
1/16” (2mm)
recess
Drill with #29 (0.136”,
3.5mm) bit, then
countersink with 1/4”
(6mm) bit, six holes
equally spaced. Use
clearance plate as
template.
Figure 2