Filter
Top Products
There is no signal displayed on the “Display”
device.
Verify the Sync or Green connector on all of your
video connections; make sure it is connected to the
correct input/output jack of the “Source” as well as
the “Display” device.
Make sure that the “Source” signal is of a valid for-
mat that can be displayed by the connected
“Display” device; for example: if the “Display” device
connected is not capable of handling HDTV compati-
ble video signals make sure that the “Source” device
is set to output SD (Standard definition or 480i)
compatible signals.
There is a signal but it is Black and White, Green or
Pink in Nature.
This is indicative of a mismatch between “Source”
and “Display” device in the component video connec-
tions.
Make sure that the “Source” signal is of a valid for-
mat that can be displayed by the connected
“Display” device; for example: If the “Display” device
connected cannot handle HDTV compatible video sig-
nals make sure that the “Source” device is set out-
put SD (Standard definition or 480i) compatible sig-
nals.
I have a picture but it is scrolling across the
screen of my “Display”.
This happens when the input signal is not is not
Page 11
HD View12
OPERATING INSTRUCTIONS
Model KD-CDA12