Kenwood XD-8551 Stereo System User Manual


 
XD SERIES (En/E2)
53
Preparation section Basic section Application section Knowledge sections
1
3
2
When you want to record a track being played, press the O.T.E. key.
Play a CD.
To end recording in the middle
At the time of CD playback, any desired title can be selected immediately for recording.
When recording sound from the MD recorder to a cassette deck, be sure to read the instruction manual of the optional MD
recorder (DM-F70).
Recording only desired titles
(ONE TOUCH EDIT.....single title recording)
When equalizer or another effect is applied to the
sound, the sound with the applied effect can be re-
corded.
P
Convenient CD recording
6
CD
TAPE
MD
TAPE
O.T.E.
÷Playback restarts from the beginning of the track being played and
recording starts at the same time.
÷ Both the cassette deck and CD player stop.
Preparation
¤
1 Load a cassette tape in deck B.
2 Select the tape transport direction (2 or 3).
3 Select “”,“[” (two-side recording).
4 Select the Dolby NR mode.
5 Select the “CD” input.
6 Insert disc(s) in the CD player.
7
When recording has been completed, a non-recorded portion of
4 seconds will be produced and the cassette deck part will stop.
The CD player will enter temporary stop condition.
To record a different track, repeat the steps 2 and 3.
If you record a CD using the SRS 3D system, it is recom-
mended to use the CCRS.
Note
Note
CD TAPEMD TAPE
O.T.E.
X-H5
Lights