Kenwood XD-701 Stereo System User Manual


 
XD-SERIES (En)
4
Preparation sectionBasic sectionApplication sectionKnowledge sections
3D Wide FL display ^
The easy to see graphical display features a large spectrum analyzer. A running indicator shows the opera-
tions such as CD playback and skipping at a glance.
Speaker cords (4)
XD-7....Series
Speaker cords (2)
XD-5....Series
Batteries (R6/AA) (2)
Accessories
FM indoor antenna (1)
Remote control unit (1)
Loop antenna stand (1) AM loop antenna (1)
Each 3-way speaker incorporates an additional sub woofer to reproduce heavy bass more powerfully than
conventional system speakers.
Built in sub woofer (XD-7....series only) ¡
Easy to operate, new multi control jog dial (
The jog dial makes possible easy setup of CD playback, timer recording/playback and other operations while
monitoring the displayed information. The same operation is also available on the remote control unit.
Equalizer patterns can not only be selected from preset patterns, but patterns also can be created and
registered. It is possible to recreate a feeling of presence and to recreate a sound field.
Versatile tone and sound field adjustment p
Three discs can be set. There are various ways for enjoyment at the time of program playback, repeat
playback, random playback, etc.
3-Disc carousel CD player
Before applying power
Special features
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your
unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the
unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Demonstration
When the power supply is restored after a power failure or the power
cord is unplugged and plugged in again during use, this unit auto-
matically starts the demonstration function (display only). During the
demonstration, the display changes in sequence but the audio does
not change. The demonstration can be canceled with the following
procedure.
÷Press the key during demonstration to stop it.
(Provided in the speaker package)
Europe and U.K. Other countries
Speaker cushion (8)
MODE
/DEMO
To switch over the demonstration:
Turn the unit OFF (STANDBY mode) and
press the key.
Each press of the key switches the demon-
stration as shown below.
1 DEMO (Demonstration executed)
2 OFF (Demonstration canceled)