Filter
Top Products
XD-750/700/550/500 (En)
29
Preparation section Basic section Application section Knowledge sections
Copying tape
(Tape dubbing)
The contents of the tape in deck A can be copied onto the
tape in deck B.
The DOLBY NR key is not active in dubbing mode. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on
deck A.
Note
Note
÷The deck B will stop after creating a non-recorded portion of about
4 sec, and then the deck A will stop.
÷Dubbing can also be stopped by pressing the stop (7) key. Note that
the non-recorded space is not created in this case.
To stop dubbing
1Select the “TAPE” input.
Let's record
INPUT
2Load tapes in the decks.
3Select “[” (double-side recording)
or ““” (one-side recording).
REV. MODE
(1)Select the deck to change the
transport direction.
(2)Press the play key corresponding
to the desired direction.
(3)Stop playback.
4Use the same tape transport direc-
tions.
7
DUBBING
5Start dubbing.
Press during stop.
A A
Playing tape Recording tape
ECHO
TAPE ))))
EX
.
BASS
EQ.
CLASSIC
MANUAL
POPROCK
VOL.
REV.MODE
B
RUNNING
INDICATOR
Running direction
÷When recording is started, the tape will be transported in the direction
selected in this step.
ECHO
TAPE ))12
EX
.
BASS
EQ.
CLASSIC
MANUAL
POPROCK
VOL.
REV.MODE
B
RUNNING
INDICATOR
DUBBING
DUBBING
A/B
Check the tape transport direction indicators.
÷Dubbing ends automatically when the side(s) to be dubbed has been
completed.
3
¡
72
1