Kenwood XD-251 Stereo System User Manual


 
20
XD SERIES (En)
Operation
Receiving broadcast station
It is also possible to receive them by one-touch operations by
storing up to 30 stations in the preset memory.
When the BAND key is pressed, this unit will be
switched on automatically.
Select the tuning
mode
BAND
Each press changes the band.
1. Select the broadcast band.
or
or
1 FM
2 MW (AM)
3 SW
kHz
MHz
PRESET
AUTO PAUSE ALL DISC RANDOM
MEMORY STOP
REPEAT 1 PRESET EQAUTO
MEMORY
DISC P.B.C
FLAT
AUTO
ROCK
PAL
POP
NTSC
JAZZ
STEREO TIMER SLEEP EX.BASSPROGRAM
L R
1 FM
2 MW (AM)
3 LW
1 FM
2 AM
Frequency display
Example when an FM station is received
To increase
frequency
To decrease
frequency
2. Select a station.
When no stations have been memorized
Auto tuning : Each press receives the next station.
Manual tuning : Press the key repeatedly or hold it depressed until a station is
received.
TUNING
kHz
MHz
PRESET
AUTO PAUSE ALL DISC RANDOM
MEMORY STOP
REPEAT 1 PRESET EQAUTO
MEMORY
DISC P.B.C
FLAT
AUTO
ROCK
PAL
POP
NTSC
JAZZ
STEREO TIMER SLEEP EX.BASSPROGRAM
L R
Lights during stereo reception
Lights during auto tuning.
PRESET indicator
Every time the key is pressed, the preset stations are switched over as follows.
Press ¢ for the order of 1=2=3 ... 29=30=1...
Press 4 for the order of 30=29=28 ... 2=1=30...
When stations have been memorized (preset call)
÷Normally, use the AUTO (Auto tuning) mode.
Select the tuning mode.
Use the manual tuning mode when reception is noisy due to weak reception.
(In the manual mode, stereo broadcasts are received in monaural.)
Each press alternates the mode.
1 “AUTO” lit (Auto tuning)
2 “AUTO” not lit (Manual tuning)
AUTO/MONO
Remote control only
4
P.CALL
¢
0
76
¢4
¶
3
7/0 8 3 1 ¡ 7/08
CD/TUNER
1
2
1
2
2