Filter
Top Products
❚ Automatic band change
❚ Selectable frequency step
(5, 6.25, 10, 12.5, 15, 20, 25 or 50kHz)
❚ Transceiver control function
❚ Voice synthesizer (requires VS-3 option)
❚ Incremental MHz key ❚ S-meter squelch
❚ Time-out timer ❚ Audible frequency identification
❚ Auto repeater offset (144MHz) ❚ Separate speaker
terminals for each band (switchable)
❚ Power-on message ❚ Contrast adjustment
❚ Dimmer control ❚ Auto power-off circuit
❚ Heavy-duty construction ❚ Optional MC-53DM
multi-function backlit mic with DTMF
Communications Anytime, Anywhere
Kenwood’s TM-V7E(BL) FM dual-band (144MHz/430MHz)
transceiver is packed with powerful on-board features that
give it the edge in today’s mobile communications. Take, for
instance, the “five-in-one” programmable memory, DTSS
and pager functions, 280 memory channels, and the ability
to receive two frequencies on the same band. Yet at the same
time it offers superb ease of operation, with its user-friend-
ly controls, large LCD and guide function.
Outside and in, the TM-V7E(BL) exemplifies
the designed-in quality and attention to
detail for which Kenwood
is famous.
Guide function
There’s no need to carry the manual
with you — the friendly guide function
displays operating instructions at the
touch of a button.
Quick-release detachable front
panel kit (option)
To enhance security, simply remove the
compact front panel whenever the car is
left unattended. If the optional quick-
release kit is used, the panel can be
mounted virtually anywhere since the
microphone cable connects directly to
the main unit.
6-pin mini DIN connector for
1200/9600bps packet
The front panel features a connector for
hooking up to a TNC, enabling either
standard 1200bps or 9600bps high-
speed packet communications. And for
extra convenience, the TM-V7E(BL) lets
you set up separate bands for voice and
data.
Quick-release front panel installations
The typical installations illustrated here demonstrate just two of the many ways in
which detachable front panel kits may be used with the TM-V7A(BL). For a minivan,
the main unit can be installed out of the way under a front seat. In the case of a pas-
senger car, it can be installed in the trunk. The choice of cable lengths ensures full
versatility to suit a wide variety of vehicles.
Note: Not all kits are sold as shown; see Optional
Accessories for exact kit contents.
DFK-7C cable kit DFK-4C cable kit
TM-V7E(BL)
tmv7_e_type.qxd 02.4.3 2:27 PM Page 4