Kenwood DMF-5020 Stereo System User Manual


 
DMF-5020/DMF-3020/MD-203 (En)
28
Each press switches the mode.
1 goes off (AUTO) : Track numbers are marked automatically.
¢
2 MANUAL : Track numbers can be marked as desired.
¢
÷The unit enters record-pause mode automatically when the key is
pressed.
1
Play the source to be recorded.
2
Adjust the recording level.
÷Decrease the level if the red segments of the peak level meter light.
Extinguished in “AUTO” mode, lit in “MANUAL” mode.
Recording is not possible if the following characters are displayed.
“DISC FULL” : Disc is full
\Erase undesired tracks.
qe
“PROTECTED” : The accidental erasure protect tab is open.
\Close it.
8
“PLAY ONLY” : A playback-only Mini Disc is loaded.
\Load a recordable Mini Disc.
÷When the EDIT / SPACE key is pressed during recording, a track
number is inserted in that position.
After recording, eject the Mini Disc.
Start recording.
Information is
being written.
Mini Disc has been ejected.
Select “AUTO” or “MANUAL”. (Remote control unit only)
Adjust the recording level. (Main unit only)
To increase
level
To decrease
level
1
Press the 8 key.
2
Play the source to be recorded from the beginning.
Recording (ANALOG input)
OVER (
dB)
MANUAL
R
L
001
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
N
ODI
S
C
WRITING EJECT
5
3
6
7
÷The eject (0)key is not accepted during recording.
While “WRITING” is displayed, do not apply shock
or vibration to the unit because information is
being written on the Mini Disc.
NoteNote
Note
Enter record-pause mode.
4
AUTO/MANU.
REC
(DMF-3020/MD-203)
(DMF-5020)
MIN
REC LEVEL
MAX
0