Filter
Top Products
EN
15
Tuning to a preset radio station
Press P.CALL/ALBUM 5 or ∞ (p.call/album + or –),
or digit buttons, 0–9 on the remote control unit to
select the desired preset number.
The preset number and radio frequency appear on
the display.
STEREO/MONO
Press the STEREO/MONO button to select mono or
stereo mode.
When stereo mode is selected, the icon “STEREO”
appears on the display (if current station is FM
stereo).
⁄
• You are able to select stereo or mono mode in FM band only.
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in
the form of digital data) for FM broadcasts along with
the broadcast signal. Tuners and receivers designed
for RDS reception can extract the information from
the broadcast signal for use with various functions,
such as automatic display of the station name.
RDS functions
PTY (Program TYpe Identi cation) Search:
Automatically tunes to a station that is currently broadcasting
the speci ed program type (genre).
PS (Program Service Name) Display:
Automatically displays the station name transmitted by the RDS
station.
Radio Text function:
Displays the radio text data transmitted by some RDS stations
when you press the RDS DISPLAY (RDS/display) button. There
is “NO TEXT” display if no text data is transmitted.
⁄
• Some functions and function names may di er in certain
countries and areas.
Using the radio
Tuning in radio stations
1 Press TUNER band (TUNER band) button to
select the desired waveband: FM or AM.
2 Press and hold
SEARCH/TUNING 4 or ¢
(4 or ¢
search +/–
) button
to tune in to the
desired frequency.
⁄
• To tune to a weak station, brie y press SEARCH/TUNING
4 or ¢ (4 or ¢ search +/–) button repeatedly until
the display shows the desired frequency or when the best
reception has been obtained.
Storing preset
You can store up to 20 for FM and 20 for AM radio
stations in the memory. When a preset radio stations
selected, the preset number appears on the display.
1 Press TUNER band (TUNER band) button to
select the desired waveband: FM or AM.
2 Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to tune in to the desired
frequency.
3 Press P.MODE (p.mode) button so that “– –”
starts ashing.
4 If you wish to store the radio station to another
preset number, press P.CALL/ALBUM 5 or ∞
(p.call/album + or –) to select the desired preset
number.
5 Press P.MODE (p.mode) button again to store
the radio station.
6 Repeat steps 2 to 5 to store other preset radio
stations.
⁄
• During program, if no button is pressed within 20 seconds,
the system will exit program mode automatically.