Filter
Top Products
4.
Connecting
speaker wire
Important
• Make sure your receiver or
amplifier’s power cord is
unplugged from the wall outlet
before making any connections.
• Make sure you connect the
positive connections of the
speakers to the positive
connections of the receiver or
amplifier, and the negative
connections of the speakers to
the negative connections of the
receiver or amplifier. If these
connections are mismatched,
you’ll get poor bass perfor-
mance and weak sound-place-
ment characteristics.
• Check to make sure that no
strands from one wire touch
any other wire.
Preparing bare wire
1 Strip 1/2” of the plastic cover
from the ends of the wire.
2 Twist the wire to get rid of the
loose strands.
Connecting speaker wire to
the KVS-60
Connecting speaker wire to
the KVS-50
Connecting banana or dual-
banana plugs to the KVS-50
Connecting spade lugs to the
KVS-50
If the lug is too narrow, insert one
prong through the hole in the post,
making sure that the positive and
negative prongs don’t touch each
other.
1
2
3
1
2
3
1
2
3
1
2