Filter
Top Products
43
KR-V888D (En/T)
Remote Control
Getting the most from your remote control
3
Press the VIDEO, AUDIO, or TV
key to select the macro location.
(MACRO1, 2, and 3 respectively)
AUDIO
TVVIDEO
•You can store up to 3 different macros, one at each key:
VIDEO = "MACRO 1", AUDIO = "MACRO 2", TV = "MACRO 3"
•The backlight flashes once when you select the macro location.
• Pressing a button other than VIDEO, AUDIO, or TV cancels the macro
program mode.
Press the keys to be operated in order.
VIDEO
FUNCTION
SHIFT
\
TV/SAT./VID
4
4
5
Terminate the macro program mode.
Press the MACRO key so that the
backlight flashes twice.
•The macro is stored at the locations specified in step 3. If another
macro was previously stored at the same location, it is erased.
Repeat steps 1 through 5 to program up to 3 macros.
MACRO
A
MACRO 1
SP.
When VIDEO is pressed
•This example shows you how to create a macro that: turns on the TV,
sets the TV to the appropriate input, selects the receiver's input
selector to LD, and turns on the LD player. All you have to do is insert
the laser disc!
•In order to allow verification of the remote control mode, the name of
the selected input appears in the receiver's display when the VIDEO,
AUDIO or TV key is pressed. When the VIDEO or AUDIO key is
pressed the receiver's input also changes.
1 Press TV > SHIFT > POWER to
turn on the TV.
2 Press FUNCTION SHIFT > "4" (TV/
SAT./VIDEO) to set the TV to the
appropriate video input.
3 Press VIDEO twice to select the
LD player registered at VIDEO 2.
4 Press SHIFT and POWER to turn
on the LD player.
EXAMPLE:
Select where the macro should be stored.
TV
\
SHIFT
\\
ER
SHIFT
ER
\\