Filter
Top Products
27
Other
KRF-V7010/V6010/V5010 (En/T)
Specifications
Caution : Read this page carefully to ensure safe
operation.
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
AUDIO section
Rated power output during STEREO operation
KRF-V7010
(DIN) 1 kHz, 0.7% at 4 Ω .......................................... 100 W + 100 W
KRF-V6010
(DIN) 1 kHz, 0.7% at 4 Ω ...............................................90 W + 90 W
KRF-V5010
(DIN) 1 kHz, 0.7% at 4 Ω ...............................................50 W + 50 W
Effective power output during SURROUND operation
KRF-V7010
FRONT(1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
.............................................................................. 100 W + 100 W
CENTER (1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
............................................................................................. 100 W
SURROUND(1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
.............................................................................. 100 W + 100 W
KRF-V6010
FRONT(1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
.................................................................................. 80 W + 80 W
CENTER (1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
............................................................................................... 80 W
SURROUND(1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
.................................................................................. 80 W + 80 W
KRF-V5010
FRONT(1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
.................................................................................. 50 W + 50 W
CENTER (1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
............................................................................................... 50 W
SURROUND(1kHz, 0.7% T.H.D. at 4 Ω one channel driven)
.................................................................................. 50 W + 50 W
Total harmonic distortion
KRF-V7010 .............................................0.03%(1 kHz, 50W, 4 Ω)
KRF-V6010 .............................................0.03%(1 kHz, 40W, 4 Ω)
KRF-V5010 .............................................0.03%(1 kHz, 25W, 4 Ω)
Signal to noise ratio
PHONO (MM)......................................................... 75 dB (IHF'66)
55 dB (DIN 50mW output)
CD .......................................................................... 91 dB (IHF'66)
56 dB (DIN 50mW output)
Input sensitivity / impedance
PHONO (MM).........................................................2.5 mV / 27 kΩ
CD ......................................................................... 200 mV / 47 kΩ
DVD 6CH (SUBWOOFER) ...................................200 mV / 10 kΩ
Output level / impedance
TAPE REC ..............................................................200 mV / 1 kΩ
PRE OUT (CENTER, SURROUND).............................. 1 V / 1 kΩ
(only KRF-V7010, KRF-V6010)
PRE OUT (SUBWOOFER).......................................... 1 V / 600 Ω
Tone control
BASS .............................................................. ±10 dB (at 100 Hz)
TREBLE .......................................................... ±10 dB (at 10 kHz)
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ............................................ 1 Vp-p / 75 Ω
FM tuner section
Tuning frequency range
U.K. and Europe ......................................... 87.5 MHz ~ 108 MHz
Russia ........................................................ 87.5 MHz ~ 108 MHz,
65.0 MHz ~ 74.0 MHz
Usable sensitivity (DIN, 75 Ω)
MONO .................... 1.2 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ..................35 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN, 1 kHz)
MONO ........................................................ 0.2% (65.2 dBf input)
STEREO .................................................... 0.8% (65.2 dBf input)
Signal to noise ratio (DIN weighted, 1 kHz)
U.K. and Europe
MONO ................................65 dB (40 kHz DEV., 65.2 dBf input)
STEREO ............................60 dB (46 kHz DEV., 65.2 dBf input)
Russia
MONO ................................63 dB (40 kHz DEV., 65.2 dBf input)
STEREO ............................58 dB (46 kHz DEV., 65.2 dBf input)
Stereo separation (DIN, 1 kHz).................................................. 36 dB
Selectivity (DIN, ±300 kHz) ........................................................ 64 dB
Frequency response (30 Hz ~ 15kHz) .................. +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
........................................................................ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod., 1 mV input)..........................50 dB
GENERAL
Power consumption
KRF-V7010, KRF-V6010 ..................................................... 280 W
KRF-V5010 .......................................................................... 210 W
AC outlet
SWITCHED .................................................. 2 (total 150 W max.)
Dimensions ...................................................................... W : 440 mm
H : 144 mm
KRF-V7010 .................................................................D : 400 mm
KRF-V6010, KRF-V5010 ............................................D : 390 mm
Weight (Net)
KRF-V7010, KRF-V6010 ..................................................... 8.6 kg
KRF-V5010 .......................................................................... 8.2 kg