Kenwood KRF-V5300D Stereo Receiver User Manual


 
English
21
Listening to a source component
VOLUME CONTROL
VOLUME /o
INPUT SELECTOR AV AUX
œ Select the source you want to listen to.
When using the remote control unit:
Use the Input source keys to select a source.
The following input source keys are prepared on the
remote control unit:
Tuner (FM/AM broadcast reception)
• "CD/DVD"
• "MD/TAPE"
• "VIDEO1"
• "VIDEO2"
• "DVD/6CH"
• "AUX"
• "AV AUX"
When using the main unit:
Use [INPUT SELECTOR] to select a source.
The input sources change as shown below with [INPUT
SELECTOR]:
1 Tuner (FM/AM broadcast reception)
2 "CD/DVD"
3 "MD/TAPE"
4 "VIDEO1"
5 "VIDEO2"
6 "DVD/6CH"
7 "AUX"
"AV AUX" can be selected with [AV AUX].
Start playback from the selected source.
é Use [VOLUME %/] to adjust the volume.
Listening to music with PURE
AUDIO MODE
The PURE AUDIO MODE allows you to enjoy music sources in
high-quality stereo.
PURE AUDIO MODE
PURE AUDIO MODE
œ Select the music source you want to listen to.
Start playback from the selected source.
é Press [PURE AUDIO MODE].
While in PURE AUDIO MODE, the listen mode is set to stereo.
The display will be turned off and PURE AUDIO MODE indicator
lights up.
PURE AUDIO MODE indicator
PURE AUDIO MODE
PURE AUDIO MODE
To cancel
Press [PURE AUDIO MODE] again.
PURE AUDIO MODE is also cancelled when listen mode is
changed. See <Surround play>.
Notes:
When the input mode is "6CH INPT", the listen mode does not
change. (<Selecting the input mode> ))
During PURE AUDIO MODE, no video signal is output.
When the PURE AUDIO MODE is canceled, the listen mode
remains in stereo if the input signal is digital.
Input source keys