Kenwood KRF-V5070D Stereo Receiver User Manual


 
6
EN
POWER
STANDBY
ON
STANDBY
AB
POWER
STANDBY
DIMMER
SPEAKERS ON
OFF
PHONES
ACTIVE EQ
LISTEN MODE
INPUT MODE BAND AUTO MEMORY
ACTIVE EQ DTS
DOLBY DIGITAL
SOUND
SETUP
MULTI CONTROL INPUT SELECTOR
DOWN
MUTE
UP
VOLUME CONTROL
ON OFF
ON
STANDBY
Names and functions of parts
1 POWER ON/OFF key ^
(For KRF-V5070D/V4070D/V5570D)
Use to turn the main power ON/OFF.
2 ON/STANDBY
key ^
(For KRF-V5070D/V4070D/V5570D)
Use to switch the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER ON/STANDBY
key
(For VR-705/715) ^
Use to turn the power ON/STANDBY.
STANDBY indicator
3 DIMMER key
Use to select the REC MODE. )
Use to adjust the brightness of the display.
4 LISTEN MODE key
Use to select the listening mode.
5 Surround LED (light-emitting diode)
indicators
ACTIVE EQ mode LED indicator (
Lights when the receiver is in the ACTIVE EQ
mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL mode LED indicator
Lights when the receiver is in the Dolby
Digital mode.
6 SOUND key §
Use to adjust the sound quality and the
ambience effects.
7 MULTI CONTROL knob ^
Use to control a variety of settings.
8 INPUT SELECTOR knob *
Use to select the input sources.
9 VOLUME CONTROL knob *
0 PHONES jack (
Use for headphone listening.
! SPEAKERS ON/OFF key *
Use to turn the speakers ON/OFF.
@ ACTIVE EQ key (
Use to select ACTIVE EQ setting.
# INPUT MODE key 8
Use to switch between full auto, digital and
analog inputs.
$ BAND key ¡
Use to select the broadcast band.
% AUTO key
Use to change “TAPE” indication to “MD”.
*
Use to select the auto tuning mode. ¡
^ MEMORY key ¡
Use to store radio stations in the preset
memory.
& SETUP key ^
Use to select the speakers' settings etc.
* MUTE key (
Use to temporarily mute the sound.
Main Unit
For VR-705/
715
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back-up the memory. This is called standby mode. Under
the condition, the system can be turned ON by the remote control unit.
Display
Speaker selection indicators
Input channel indicators
Output channel indicators
Band indicators
STEREO indicator
Frequency display,
Input display,
Preset channel display,
Surround mode display
Speaker indicator
PRO LOGIC
indicator
AUTO DETECT
indicator
DOLBY DIGITAL
indicator
DTS indicator
CLIP indicator
AUTO indicator
MEMO. indicator
ST. indicator
TUNED indicator
MUTE indicator
TONE indicator
LOUDNESS indicator
96kHzfs indicator
DSP indicator
DIGITAL indicator
6CH INPUT indicator
Connection at POWER ON/OFF key (for KRF-V5070D/V4070D/
V5570D)
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.
*5337/01-07/EN 27/12/02, 1:04 PM6