Filter
Top Products
— 39 —
Connecting Cables to Terminals
TEL MUTE
P.CONT.OUT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Front left output (White)/
Non-fading left output (White) (KRC-PS959R, 859R/C/W only)
Front right output (Red)/
Non-fading right output (Red)
(KRC-PS959R, 859R/C/W
only)
Rear right output
(Red)
Rear left output (White)
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
KENWOOD disc changer/DAB control input
Battery cable (Yellow)
Ignition cable (Red)
FM/AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory4)
To connect the Disc Changer or DAB unit,
consult each manual.
NOTE
Wiring harness
(Accessory1)
If no connections are
made, do not let the
cable come out from the
tab.
NOTE
TEL mute cable (Brown)
Power control/ Motor antenna
control cable (Blue/White)
Connect either to the power
control terminal when using
the optional power amplifier,
or to the antenna control
terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse
Connect to the terminal that is
grounded when either the
telephone rings or during
conversation.
To connect the KENWOOD
navigation system, consult your
navigation manual.
NOTE