Filter
Top Products
— 7 —
Basic operations (See page 4)
Attenuator
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning down the volume all the way turns off the attenuator
function.
NOTE
Loudness
This function amplifies low and high tones when the volume
is turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Press the LOUD button to switch the loudness on and off.
Tuning
You can choose from three tuning modes: auto seek, local
seek, and manual.
When the AUTO indicator is off, manual tuning has been
selected, and when it is ON, auto seek tuning has been select-
ed.
Local seek refers to auto seek tuning that skips radio frequen-
cies with poor reception. When local seek is on, the LO.S indi-
cator turns on.
Press the SRC button repeatedly until tuner mode is obtained.
"TUnE" is displayed when the tuner mode is selected.
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
Each time you press the AUTO button, the mode switches as
follows:
▼ AUTO indicator LO.S indicator
Auto seek
❍ ✕
▼
Local seek ❍ ❍
▼
Manual ✕ ✕
• Auto Seek Tuning
Press the
¢ button to seek increasing frequencies.
Press the
4 button to seek decreasing frequencies.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the
4 button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being
received.
NOTE
4
3
2
1
Tuner features (See page 5)