Filter
Top Products
19
EN
Preparing for surround sound
6
Input the distance to the speakers.
• Indicators appear only for the channels of the speakers selected
in step 3.
1 Press the
∧/∨ keys
or MULTI
@/# keys to select the SP
DISTANCE on setup displays and press the SETUP key again.
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) : ____ feet (meters)
Distance to Center Speaker (C) : ____ feet (meters)
Distance to Front Right Speaker (R) : ____ feet (meters)
Distance to Surround Right (SR) : ____ feet (meters)
Distance to Surround Back Right (SBR) : ____ feet (meters)
Distance to Surround Back (SB) : ____ feet (meters)
Distance to Surround Back Left (SBL) : ____ feet (meters)
Distance to Surround Left (SL) : ____ feet (meters)
Distance to Subwoofer (SW) : ____ feet (meters)
• If you have selected “SB NORMALx1” or ”SB LARGEx1”,
“SBR” and “SBL” are not appeared but “SB” is appeared on the
Display.
3 Use the
∧/∨ keys
or MULTI
@/# keys to select the speakers
and the MULTI CONTROL knob or MULTI %/fi keys to adjust
the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
L
SL S SB SR
CR
SP MUTE
AB CLIP
SW
LFE
STEREO
Indication in feet Indication in meters
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
7
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the ∧/∨ keys
or MULTI
@/#keys to select the LFE
LEVEL.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the LFE LEVEL.
LR
SP MUTE
AB CLIP
STEREO
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the SETUP key again to return to main setup displays.
8
Select the display mode.
1 Press the ∧/∨ keys
or MULTI
@/# keys to select the DISP
MODE.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the display mode.
1 DISP SELECTOR : Displays the current input selector.
2 DISP LISTEN : Displays the current listen mode.
SP MUTE
AB CLIP
LR
STEREO
3 Press the SETUP key again to accept the setting.
4 Use the
∧ key or
MULTI
# key to select EXIT.
LR
SP MUTE
AB CLIP
SL S SB SR
STEREO
5 Press the SETUP key to exit the SETUP mode.
05.2.7, 7:11 PM19