Filter
Top Products
12
EN
COAXIAL OPTICAL OPTICAL
VIDEO 3
OPTICAL
MONITORCD/DVD
DIGITAL IN
DIGITAL OUT
VIDEO
2
DVD/
6CH
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully. 8
COAXIAL
DIGITAL
OUT
(AUDIO)
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See “Connecting video compo-
nents”.) !
DOLBY DIGITAL RF
OUT (AUDIO)
LD Player
PCM OUT
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Setting up the system
RF digital demodulator
(Commercially avail-
able)
CD Player or DVD Player
Optical fiber cable
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Optical
fiber cable
COAXIAL DIGITAL
OUT (AUDIO)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video compo-
nents”.) !
Optical fiber
cable
OPTICAL DIGITAL
OUT (AUDIO)
OPTICAL DIGITAL
OUT (AUDIO)
OPTICAL DIGITAL
IN (AUDIO)
MD Recorder
04.6.10, 5:40 PM12