Kenwood SW-38HT Speaker User Manual


 
ENGLISH
2
EN
Before applying power
Caution: Read this page carefully to ensure safe operation.
Units are designed for operation as follows.
U.S.A. and Canada ............................................ AC 120V only
Europe and U.K. ................................................ AC 230V only
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN
THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
Safety precautions
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Australia ............................................................AC 240V only
Other countries .......................... AC 110-120 / 220-240 V only
switchable*
WARNING
Due to the mains switch was located at the rear panel, the
apparatus must be located in the open area without any
obstructions to access the mains switch.
CAUTION
The power in this equipment will not be completely cut off
from the AC wall outlet when the main switch is turned
OFF.
*
AC voltage selection
The AC voltage selector switches on the rear panel are set
to the voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your AC
outlet, make sure that the setting positions of these switches
match your line voltage. If not, they must be set to your
voltage in accordance with the following direction.
Note: Our warranty does not cover damage caused by
excessive line voltage due to improper setting of the AC
voltage selector switch.
AC voltage selector switches
Move switch lever to match your line voltage with a
small screwdriver or other pointed tool.
AC220-240V~
AC110-120V~
*1227/02-06/EN 04.1.26, 6:21 PM2