Kenwood DT-7000S Stereo System User Manual


 
DT-7000S Instruction Manual
8
Selecting entertainment
In addition to the Normal Operation and Category Select screens, the DT-7000S has
three ways to search for and select entertainment: by stream, by artist, and by song.
Selecting entertainment by stream (Stream List Mode)
1. Press the ENTER button while in the Normal Operation mode. The Stream List screen
will appear, showing all available streams regardless of category (below):
2. Use the CH./PRESET jog dial (front
panel) or CH Buttons (remote) to
move through the list of streams.
3. When the stream you want is
highlighted, press the ENTER button
to play the stream. The display will
automatically return to the Normal
Operation screen.
Selecting entertainment by artist
(Artist List Mode)
1. While the Normal Operation screen is active, press the ENTER button once, then the
DISPLAY button once. The Artist List screen will appear, showing all currently-playing
artists regardless of category (below):
If composer information is
available for a stream, it will be
displayed along with the artist
information.
2. Use the CH./PRESET jog dial (front
panel) or CH buttons (remote) to
move through the list of artists.
3. When the artist you want to hear is
highlighted, press the ENTER button
to listen to them.
• After you make your selection, the display will revert to the Normal Operation screen.
Selecting entertainment by song (Song List Mode)
1. While the Normal Operation screen is
active, press the ENTER button once,
then the DISPLAY button twice. The
Song List screen will appear, showing
all currently-playing songs regardless
of category (right):
• Song titles too long to fit on the
highlight bar will scroll.
2. Use the CH./PRESET jog dial (front
panel) or CH Buttons (remote) to
move through the list of songs.
3. When the song you want to hear is highlighted, press the ENTER button to listen to it.
• After you make your selection, the display will revert to the Normal Operation screen
Note: In the Stream List, Artist List and Song List modes, if you don’t want to make a
selection, press the SETUP button to exit the mode and return to the Normal Operation
screen for the active stream.
Setting/using stream presets
Setting stream presets
You can store up to 80 of your favorite streams as presets, for quick access. Presets are
stored in 4 nameable banks, each containing 20 stream presets.
1. Press the BANK button to activate
the preset bank you want. The
selected bank is shown in the lower
left corner of the Normal Operation
Screen (right).
2. Select the stream you want to preset
(see Basic Operation and Selecting
entertainment, pages 7 – 8).
3. Hold the number button you want to
store the stream in for at least 2
seconds.
• To store presets 10 – 20, touch the “1” button, then immediately hold the second
number button for at least 2 seconds. For example, to set preset 12, touch the “1”
button, then immediately hold the “2” button for at least 2 seconds.
• The selected preset number will flash and then remain lit on the display to show that it
has been memorized.
• If the preset button already has a stream stored in it, it will be replaced with the
new stream.
Tuning stream presets
The 20 presets in the active bank can be selected by pressing the number buttons.
1. Press the BANK button to cycle through the four banks of preset stations. The display
will show the current preset bank and active preset number in the lower left corner.
2. When the desired preset bank is displayed, use the number buttons to select the
desired preset stream.
Searching for a stream preset (Preset List Screen)
There are two ways you can search for a stream preset.
For both, press the SEEK button to
enter the Preset Tune mode. The
Normal Operation Screen will change
so that the preset bank and preset
number will be highlighted (right).
Option 1: Use the CH./PRESET jog dial
(front panel) or CH Buttons
(remote) to move through
Stream List Screen